Sign In


Forgot your password?

Create Account


About the Author


  1. Date: November 29, 2015 at 17:23
    Author: N!cky

    Sta si pravio ovo? Svetlo za dslr

  2. Date: December 18, 2015 at 17:34
    Author: Tai Viinikka

    Thanks, that helped me see a couple things I would have done wrong! Cheers.

  3. Date: April 24, 2016 at 20:21
    Author: Thiagesh thg

    Great thanks!!!
    would have been more helpful if u had narrated it 😀

  4. Date: January 7, 2017 at 00:05
    Author: Sal DiMarco

    hi there im trying to solder some aftermarket l.e.d's on the panel board of a 2008 toyota tundra instrument cluster but the original l.e.d's on the elect. panel have 4 little wires dont know how to call them sorry but im guessing two are positive and two negative just dont know how to tell which are positive and negative if u can please help me?

  5. Date: February 17, 2017 at 14:39
    Author: Wild Samosa

    Very helpful video – thank you! Could you tell me what size LEDs you are using here?

  6. Date: February 21, 2017 at 15:30
    Author: Cosmo John

    What happens when LEDs are having a solder point at the middle of its back instead of just left and right sides?

  7. Date: February 22, 2017 at 08:09
    Author: Stan Skaggs

    What temperature did you have your soldering iron when you installed these LEDs? I'm asking because when I unsoldered some broken ones on my system, I noticed that the LED's were melting as I unsoldered them. I'm worried when I put new LEDs on my board, the same thing will happen if my soldering iron is too hot. Let me know as soon as possible, I'm ready to start soldering here.

  8. Date: April 28, 2017 at 04:12
    Author: Rc_ KiNg

    hey so i have a phantom and the led 5050 thing came of and there are 3 pins on each side and i was wondering if i can just solder all 3 pins together on 1 side and the other and then solder the led thing like you did

Leave a Comment