Sign In


Forgot your password?

Create Account


SMD Soldering – Common Packages

SMD Soldering - Common Packages

SMD Soldering - Hand Soldering - Common Packages : Resistor Array, SOT23-6, SOT23-3, SOT89, SOT223, TO252 (DPAK), TO263 (D2PAK), TO263-5, Mini PushButton, Crystal HC49, Aluminum Capacitor, Power Inductor

Paste Flux Mechanic MCN-UV80 :
Bottle Dispenser :


List your electronic components at

Tags: smd components

About the Author


  1. Date: February 11, 2018 at 19:03
    Author: hido1995 Hido

    those compand that have plastic support hard to solder it like Aluminum Capacitor in 10:09 and Power Inductor , need more time to verify if it's stick or not

  2. Date: February 13, 2018 at 20:53
    Author: tim a

    ?? ?????????. ??????? ???????????? ????? ????????? ??????? ????? ?????. ??????????? ????????? ??????, ?????????? ?????????. ???? ?????? ????? ???????, ?????????? ?????????????? ???????? ????????.

  3. Date: February 20, 2018 at 12:33
    Author: superdau

    I don't think you're supposed to get flux/alcohol on top of a button. At least that's what I read in switch manufacturers soldering instructions. You will get flux residues inside the switch which will make it unreliable.

  4. Date: March 5, 2018 at 05:05

    I have a question. I've noticed that you don't apply flux on all pads before placing a component, is there a reason for that? I always thought that it is a good practice to do it, since this way flux goes under every lead of the component and that should help the solder to flow better in the places where the tip can't reach.

  5. Date: March 5, 2018 at 13:23
    Author: Andrew Hudson

    This is the only soldering video I have seen that is actually correct in every way. I can't think of anything negative. Good job sir. Keep it up. I teach a power electronics design class at work and soon I will need to cover soldering techniques. Would you mind if I used this video?

  6. Date: March 18, 2018 at 22:24
    Author: Digital Ghosts

    Awesome! This video reassured me it's not that hard to solder those parts at all!

  7. Date: April 30, 2018 at 20:10
    Author: K8BYP _

    VERY bad work, way too much flux and heat. The poorly trained tech cant appreciate how tiny the bonds inside those packages are and what this kind of overheating does to them and the PWB. New component leads should not require any more flux than what is in the solder, certainly not that much thick paste.Setting the iron to 350-400C is GROSSLY OVERHEATED. The solder has a melting temp of around 400 FARENHEIT and the mass of the elads and PWB trace is nearly zero. Notice that the operator is having to retouch the joints 4 or 5 times- this is due to the leads being overheated and burning the flux.

  8. Date: May 8, 2018 at 01:45

    Androkavo congratulations, beautiful pictures. Could you do SMD desoldering – Common Packages?

  9. Date: May 12, 2018 at 21:41
    Author: FireguyNtx

    You make those components look huge and easy to solder. I don't see the too much solder on components myself. Looks like just the right amount to me.

  10. Date: May 17, 2018 at 19:41
    Author: dab Chang

    Nice skill, really learned a lot from it, thanks for the video 🙂

Leave a Comment